|
quick throttle would be consist of:
Right Sized FMIC - Most IC's are expensive and big but theres a few out there right sized
GT2871R turbo - I'd run an .86 A/R
Turboback exhaust - Manifold, Elbow, Downpipe, 3" Cat, 3
LW Pullies - Reduce Drag on Engine
Port an Polish - More air Velocity, not volume
Cams - I'd Run 264's
LW Flywheel - less rotational Mass
LW engine Internals - Not so much over bore but that could help also
and there a bit more if you'd like, basically build like an N/A engine
|