Sydewayz' KA24DERT Build Up Thread

[SyDeWaYz]

Ok. It is time. First off, if you dont know my previous Trails and Tribulations, you got some history to read up on.

My first 95 Base met its demise:
The "My g/f wrecked my 240" Rebuild thread [RAWR!!]

And I picked up this sucker for 2,500:
Im Back - Picked up a beautiful 95 SE

So this is where we stand:

Suspension/Brakes:


Maxxspeed 1.75" Drop Progressive Rate Springs
KYB AGX Shocks
GS Adj. RUCAS
ES Polyurethane Sub frame Bushings
Drilled/Slotted Brembo Rotors
300zx Front Brakes

Drivetrain:

5 speed swapped all by myself!!!
Custom Short Shifter
Synthetic Gear Oil
6 Puck Sprung Clutch
11lb Cromoly Flywheel
Excedy Pressure Plate

Motor:



KA24DE (till da death)
Custom 3" SRI
Underdrive Pulley
110Amp Alternator
4-2-1 Headers
Hi Flow Cat
3" Catback, Dual Tip (son!)
Synthetic Oil
Regrounded

Long Grain Rice:


Motegi Touges 18X9 +12 front, 18X10 +30 rear
Redline goods leather shift/parking brake boots
Sounds System
Blue Guage Lights (jdm tite yo)

Things in my living room:


Nismo power brace

All in all pretty sad.

Now im going KA-t, needless to say. Once thats done im gonna figure out a way to twincharge this bad boi, and blow it up. Right now im doing turbo first, shooting for a modest 220-230 whp. Not too much to ask for right? Once im succesful, i will build the engine and proceed with the rest. Problem is im new to boosting and have a lot to experience, and twincharging isnt going to be easy so i will need some expert advice from you guys...

KA-t parts so far:

GT28 dual BB turbo with t3 flange. wtf?
370cc injectors

Turbo:


Spent so far:
Turbo - 250
Injectors-74
Total: $324

[USDM Rice]

damn, you're going to twincharge that bitch? good luck!

[mrbojangles]

imma beat you to it...... i've decided to strip you of all your glory and happiness in the acheivement

[SyDeWaYz]

Lol bj (yes i just called you blowjob), you'll never beat me. and i thought you were, and i quote, "mr. im not a fan of parasitic power, meh"

............

[LongGrain]

nice turbo, i have the same one

[mrbojangles]

Originally Posted by SyDeWaYz

Lol bj (yes i just called you blowjob), you'll never beat me. and i thought you were, and i quote, "mr. im not a fan of parasitic power, meh"

............

I'm not lol. but no lag + turbo top end is too good to pass up

[Mtndrifter14]

ugh good luck on tuning a twincharged motor but if you can do it and see a valid point to it then go for it

[TomTomTuning]

Why the hell do ppl keep talking about Twin Turbo?

Where did he say he was going to do a KA-TT (lol)

[wheresthaboost?]

Originally Posted by TomTomTuning

Where did he say he was going to do a KA-TT (lol)

Originally Posted by SyDeWaYz

Once thats done im gonna figure out a way to twincharge this bad boi, and blow it up.

took me a sec to find it.. dunno what all the twincharge hype is about

[LongGrain]

twin charging is not twin turbo.

if you werent blind you would have seen that he said KA24DERT

R is for supercharged, T is for turbocharged...it will be both.

[TomTomTuning]

lol.....

[mrbojangles]

twincharging = twin turbo supercharged... whoever said twincharged is a reeeeetard :P...

twincharged sti's rawk my cock though

[SyDeWaYz]

wait, twin charged means a fuckin turbo and a fuckin supercharger, not twin turbos you fucktards......unless you wanna coin a word like dualcharged...never heard of it

jesus.

anyway, thanks to long grain i believe i stumbled upon a skyline gts-t turbo.....rawr...now if only i could determine whether this turbine wheel is steel or ceramic..

btw, wtf is so impossible about twincharging. it has very valid applications. take a look at the hp and torque curves of a stock ls7 and imagine emulating that....

and there is someone who can tune anything, i definitely will not be tuning it once i even GET to that point. its been done on nissan motors before, and it can be done again.

[mrbojangles]

yeah your right about twin charging... im trying to find out what term that one company used for its TT s/c-ed sti kit they sold for like 10k.

its not hard to calculate the tune, just get a trusty local guy to do it on a dyno and i dont imagine things other than the bottom end fuel adjustment would be off since things like timing are usually boost related adjustments (so it wouldnt matter what rpm, just what psi you are at).

[SyDeWaYz]

thats what i thought.....

so who wants to machine me a 6 bolt flange for my mutt skyline turbo....i have made one from a cereal box, but that wont hold much boost...

[SyDeWaYz]

ok update, i got my new 6 puck in and i also picked up a 6 bolt turbo elbow for the rb25. fits like a glove....ready to rumble.

more to come...

[SyDeWaYz]

Eh, Not much of any update, but Ive been busy painting my eclipse....

Anyway, i tinted this bitch, 20% throughout and whored her out on the cam a bit....
( I NEED A NEW FUCKING CAMERA, FUCKING 2.1MP BULLSHIT)




And i picked up a lil something kinky for ms. 240sx to put on...heh heh and origin stylish frp kit...
You'd never guess how much i got it for lol..




Ill be spraying that and shit after i finish the turbo....

I also got a pair of Spencer's lenses...and i picked up some tsx projectors for a retro, will be doing that next. turbo is on hold cause I'm excited about HID lol.



Anyway, thats where I'm at. More to come.....

[mrbojangles]

tint is too dark... ew

[slappy]

Dont like the Motegi wheels.

Dont like the shift/e brake boot.

Dont like the red valve cover.

[SyDeWaYz]

^^^ Eh? You got something against me?

[slappy]

No.

[SyDeWaYz]

mmkay.

[s14240sxsilvia]

looking good so far

[SyDeWaYz]

so, yeah, about my car.....

working on some clutch hydraulic issues. also getting my projectors retro fitted....

updates to come

[jiminycricket]

wow. This is really gnarly. I'll be looking forward to the final result!

turbo truck motor FTW