Quote:
|
Originally Posted by Shwag
Those bulbs say "H10" on them...
They are the same as regular H3 bulbs, except the connector is different, using two "prongs" instead of the one hot wire.
|
Which bulbs, the H3C? That is why I was saying that they were different. I DON'T SEE HOW AN H10 would fit in there though, as the socekt is not made for that.
Quote:
|
Originally Posted by Shwag
on the dual projectors, the lowbeam isn't a H3C, its a regular H3. You don't have to modify the dual projectors in any way to use H3 bulbs for the fogs, there is already a place to connect the stock ground wire to in the housing, and the stock hot wire leading to bulb will mate perfectly fine with the H3 tail/hotwire/whatever.
|
Check your notes again. You may have a pre-modified set of lights.
This is from the FAQ on zilvia from a mod who is in Japan right now...
Halogens:
Foglamps - H3c
Hi/Lo - H4
Dual Projectors:
Lowbeams - H3c
Highbeams - H3
Foglamps - H3c
Triple Projectors:
Lowbeams - H1
Highbeams - H3
Foglamps - H3c
There it is.
for the turnsignal/marker lights (side lights, not bumper), it's just 194 wedge bulbs.