hey guess anyone have a write up about removing the dash? i searched didnt find n e thing.. thanks..
help with removing dash...
joshy240sxxx
1 - 10 of 10 Posts
Joined
·
436 Posts
hey guess anyone have a write up about removing the dash? i searched didnt find n e thing.. thanks..
Joined
·
5,412 Posts
there is a write up on zilvia, but all the picture is gone
Joined
·
116 Posts
Gotcha covered:
http://www.putfile.com/stuckeypcs/images/120350
Go to that link, there are several pictures of where all the bolts/screws are that hold the dash to the car. Also note, you will need to drop the steering column (four bolts total). You'll need to remove the steering column cover, drop the column, remove the instrument cluster trim, remove the instrument cluster, remove the radio cover/bezel, remove the radio, unscrew the air/heating control from the dash and let it drop and finally remove the two screws that hold the hinges of the glove box to the dash. Also keep in mind when you remove all the bolts/screws and these other components you will find when pulling the dash out some resistance. That's because there's tubing/ducting that you will have to remove from the defrost vents on both sides of the dash. Just reach in there and pull them out.
http://www.putfile.com/stuckeypcs/images/120350
Go to that link, there are several pictures of where all the bolts/screws are that hold the dash to the car. Also note, you will need to drop the steering column (four bolts total). You'll need to remove the steering column cover, drop the column, remove the instrument cluster trim, remove the instrument cluster, remove the radio cover/bezel, remove the radio, unscrew the air/heating control from the dash and let it drop and finally remove the two screws that hold the hinges of the glove box to the dash. Also keep in mind when you remove all the bolts/screws and these other components you will find when pulling the dash out some resistance. That's because there's tubing/ducting that you will have to remove from the defrost vents on both sides of the dash. Just reach in there and pull them out.
Joined
·
436 Posts
ya usually i dont ask kuz i can do it but the problem was my left side of my 240 is smashed in and i was slowly pushing it out.. and wanted to know if there were n e hidden screws i couldnt get to thanks u guys! and now i get to sell this mint dash fun
Joined
·
436 Posts
cant really find the defroster vent screws thats the last thing i need to do....
Joined
·
116 Posts
The defroster vent screws (3) are in the middle section. You'll have to pop off the two center (long) defrost vent covers. You'll see them stand out after that.
Joined
·
436 Posts
ya got it didnt pop them off when i posted that thanks guys for the help
1 - 10 of 10 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
