Nissan 240SX Forums banner
Cancel
Create thread New Garage Forums

Almost Done need a lil more help

Jump to Latest
1 - 12 of 12 Posts
C

Chaos The Xile

· Registered
Joined
·
349 Posts
Discussion starter · #1 ·
Ok I almost have my Entire Swap mapped out minus the following, any website suggestions would be perfect...

I need a new set of Pullies, Pully Belts, Turbo oil lines, RB20-S13 Downpipe,
All for the RB20DET and that should just about do it...
 
#2 ·
my s13 megan racing DP needed minor grinding to work around the steering column but thats it. Do you have the belts that need to be replaced or have nothing? I have a thread on here somewhere about lengths and they are all 4 rib/groove. I say braided turbo lines....tight! Pullies are going to be hard to find, like which ones do you need? alternator and p/s?
 
Save
Reply Quote Like Like
#3 ·
why do you need to change the turbo lines?
i seriously hope you are not upgrading the turbo and other bits right of the bat that is only asking for trouble....... again trust me as i spent nearly a month just tracking down problems.
as for pullies no one makes a light weight kit, yet..... Unorthdox racing has a set in prototyping but untill there is a large enough demand they will not produce.
 
Save
Reply Quote Like Like
#5 ·
Ha! competition! I have the turbo oil lines AND the stock pulleys and some belts, and I could make you a dp when I get a new pressure regulator for my welder. BUT the megan racing ones are pretty good quality (ie stainless). Anyway, pm me or dlsracing for some shit. I won't undercut him on the lines bc that would not be cool, but if you need some other things, like pulleys, let me know.
 
Discussion starter · #6 ·
My Pulley's a messed up looking I need some new ones all of them and I was going to get Power Enterprise Pulley Blets. Or another Brand If someone had a suggestion. And to Carl I was considering changing the Turbo to a slightly bigger turbo nothing major just yet. What types of problems are you talking about???
 
Discussion starter · #7 ·
[s14-240 inbox full]Ok I have the engine the Pulleys are as good as shit on the wall??? I need to replace all of them, Also the Turbo lines I just want to replace with new ones becuase I don't want the old stock ones to go out unless you or DL have some good looking lines.

As far as the downpipe goes how much are you charging to make me a DP? If now do you have a link to the Megan site for they're DP too??
 
#8 ·
if this is your first swap then concentrate on putting the engine in the car and getting it running first, then drive it for a bit then mod.
as far as getting uprated belts, unless you chronicly eat belts stock replacements work fine.
as far as pullies go, try modestmouse on this forum as i know he has some spare motors worth a go i suppose.
 
Save
Reply Quote Like Like
1 - 12 of 12 Posts
About this Discussion
11 Replies
7 Participants
Last post:
andrewmp6
Nissan 240SX Forums
posts
1.6M
members
94K
Since
2002
A forum community dedicated to Nissan 240SX owners and enthusiasts. Come join the discussion about performance, builds, engine swaps, turbos, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
S13 240SX (89-94) New Member Introductions General Tech S14 240SX (95-98) KA24DE & KA24E