Nissan 240SX Forums banner
Cancel
Create thread New Garage Forums

Picts. of the SR's new setup! (56K beware)

Jump to Latest
181 - 200 of 256 Posts
Discussion starter · #181 ·
evo1 said:
Fireplug, what kind of ECU are you running? i'm planning on the EMS for our drift car but still looking into how much luck the Nissan guys are having with them.
some pics of our car.
http://gtfabrications.com/gtf_pg/thumbnails.php?album=7
Click to expand...
Car looks nice. I'm running AEM's unit. I've had virtually no problems with the ecu. I haven't setup the 2 step launch yet, once the car hits the ground for the season I'll do that and hopefully I'll get some nice times out of it. :eek3dance

gold_s14 said:
i dont know how to really say this but i am almost positive i saw that same pic like a year or 2 ago on nico cause i hosted that same pic on www.atlantastreets.com and ww.ga240sx.com
Click to expand...
Not quite sure which picture you're talking about? I'm on a lot of other boards. (including nico)
 
Discussion starter · #182 ·
Image

The newest edition of the built sr20 is in and has been fired up for the first time last sunday. We'll be putting the interior and rear suspension back on the car this weekend and it'll be hitting the streets for some break-in time...then straight back to the dyno to shatter last season's 500whp@21 psi.:dancingco
 
Discussion starter · #184 · (Edited)
Well...she's on the ground again!
Image


Image

And she's caged this season...
Image


Image



Image

Time to break in the new parts, and laugh at last season's 500whp...stay tuned.

srs13 said:
..ooo and last seasons numbers are good but what are your going to put down now with the new edition
Click to expand...
:heyhey who knows for sure...only the dyno can tell!
 
Discussion starter · #187 ·
minime said:
that's not exactly a cage.........

are you planning on adding on to it or something?
Click to expand...
Haha, ok...it has a 6 point roll bar, does that make you feel better? And yes, I will be needing to add to it as I'm sure I'll exceed the 135mph limit for a 6 point.
 
Discussion starter · #190 ·
s14-240 said:
This is what I get for NEVER checking the sr section. I didn't even know you were on this forum. Car looks sick. I wish I had gotten in touch with you when I was in town for a week. Good work Aaron.

Walter
Click to expand...
:rotflmao Yep, it's out and about again walter! I'll be driving it this weekend and getting some miles on the new setup. Once that's achieved I'll be heading to the dyno...I pulled it in the garage last night and buffed the paint. It came out really good, hopefully I'll have some pictures up when I'm done.
 
Discussion starter · #191 ·
Okay so I have most of the interior in and I got sick of how the car's paint looked, especially after it had been sitting for almost a year. It was time for a buff. Here's a few pictures of how it turned out.


Image

Shot of the rear hatch.
Image

Rear/side shot.
Image

Shot of driver side.

Tonight's task is dismounting the tires, painting the rims all one color, and lowering the vehicle all around. :)
 
#193 ·
is that a homemade cage or did you buy it pre bent and weld it in??...i have to put one in my s14....and how hard was it to paint it inside the car

and another question is what rpm are you hitting full boost @?...im tryin to figure out what range i may hit full boost (GT3582r "35R")
 
Discussion starter · #197 · (Edited)
sldordies13 said:
is that a homemade cage or did you buy it pre bent and weld it in??...i have to put one in my s14....and how hard was it to paint it inside the car

and another question is what rpm are you hitting full boost @?...im tryin to figure out what range i may hit full boost (GT3582r "35R")
Click to expand...
It's a custom built 6 point built by a shop here. They bent it and welded it accordingly. I'm pretty happy with it, he made the clearences between the door bars and the doors pretty tight! It wasn't necessarily "hard" to paint the cage inside the car...it just wasn't the most fun thing I've ever done. No matter how much you mask off, you're bound to get overspray on something! And I did. I ended up having to spray solvent all over the inside (and some of the outside) of the car to get rid of the overspray. To answer your second question about boost, I'm getting it around 5k-5500. I also have HKS 272 step 2 cams and the turbo is a T4.

Here's some pictures with the wheels all one color, I hurried and painted them so I could get the damn thing on the streets without having to worry about mismatched wheels. :)
Image

Image

Image
 
181 - 200 of 256 Posts
About this Discussion
255 Replies
123 Participants
Last post:
Fireplug
Nissan 240SX Forums
posts
1.6M
members
94K
Since
2002
A forum community dedicated to Nissan 240SX owners and enthusiasts. Come join the discussion about performance, builds, engine swaps, turbos, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
S13 240SX (89-94) New Member Introductions General Tech S14 240SX (95-98) KA24DE & KA24E