Nissan 240SX Forums banner
s13
1-20 of 460 Results
Advanced
  1. S13 240SX (89-94)
    Any one have this issue? Went to one track day and the metal collars shifted a bit, now my car clunks a lot when turning. Will poly bushings fix this? Would it be beneficial to weld brace at bottom of control arm? You can tell the difference from the pics
  2. S13 240SX (89-94)
    hey guys ive moved to japan and bought a 1996 180sx type x. i cant find anything such as ecu or exhaust parts for a 96. i see everywhere that the years for s13's stop at 94? am i dumb? or is the 96 spec the same as a 94 and i shouldnt worry about purchasing parts by year of car. thanks!
  3. Cars For Sale/Wanted
    Hey new to these forums since craigslist has been kind of a dud I figured I’d have better luck on here. I’m located in san diego but willing to go to most of the socal area if the cars worth it, unless you’re willing to tow/drive it down here. I’m looking for another 240sx/s13 coupe prefer to...
  4. New Member Introductions
    I have a stock s13 and every time I connect the battery the fuel pump primes and the small red dash lights turn on, I can put windows up and down. it basically goes into accessory mode. If I turn the car on it will run and drive fine but it doesn't shutoff even if I take the key out. I checked...
  5. KA24DE & KA24E
    Hey gang, long time since I've posted on here. Just had a KS-T S13 rip past me in my G8 GT. Just wanted to see if they might be on here.
  6. New Member Introductions
    so i have a '90 chassis with a '98 dohc swap. for some reason they were running a ka24e maf and the car runs like shit because of it. i bought a ka24de maf to put in, but the connectors are different. so, can i just buy a ka24de maf connector, cut the wires and solder them together? or how...
  7. S13 240SX (89-94)
    Just recently I have realized my oil pressure light in my SR20 swapped s13 is flickering in an almost impossible to see dimness. But It will go away when I rev, but sometimes it will flicker dimly when I am cruising. I know I have oil pressure because I have an auto meter oil pressure gauge...
  8. S13 240SX (89-94)
    Ive always liked wagons and ive always liked 240s post pics, videos maybe even specs on how you built your wagon tops
  9. Items for Sale
    Bunch of parts I found in a box. Looking to get rid of them all. Feel free to message me on here, or call/text. Cheers. Location: Calgary, AB, Canada Call: 1.403.993.8986 Nissan OEM S13 240SX VLSD 1992 Price: $200 CAD A VLSD off a 1992 Nissan 240sx S13. Engine was blown up, so no issues with...
  10. New Member Introductions
    What's up guys I recently got an s13 and was looking at getting a Silvia bumper for it BUT after doing a little research I didn't see anything about putting one on and keeping the stock front end. I like the pop ups and wanted to keep them (also wasn't really tryna drop too much dough on doing...
  11. New Member Introductions
    well well well, what one is the best to go with? I'm an ex s14 n/a owner (190 whp ka) with plans for an s13 coupe build, I think I want a KA-T or CA18 but I'm interested in rb, sr and vg too has to be Nissan , ive done just about all the research so I'm mainly looking for opinions on how the...
  12. New Member Introductions
    Looking at a VG30DE swap but don't have much experience with wiring harness'. does anyone have some knowledge to throw at me as to what i would need for swap like that?
  13. KA24DE & KA24E
    Hi please excuse my noobniess but I just wanted to here other people's thoughts on my idea of turboing my Ka24e, Last year I bought the motor with about 140k miles and I have seen that it has been a good motor to me and I would like to take it a step further with a CXRacing turbo kit. My plans...
  14. New Member Introductions
    Hello, I am FujimiKaido, and I need some help. I'm a future owner of a 240sx In the attached link, there is a set of tail lights for an S13 Hatch that I would like to acquire. I've been told that they are custom and was wondering how I could either make them myself or where I could get them...
  15. New Member Introductions
    Does anyone happen to know of a website or even just someone in the southwest area that sells s13 pignose front bumpers. I'm struggling to find any.
  16. New Member Introductions
    Hey guys. I could use some help figuring out what’s going wrong with the hydraulic clutch/Manual Transmission in my RB20DET-powered S13 The Problem I cannot get my car to go into (any) gear while it is running. I depress the clutch, and I push the gear selector lever (“The Shifter”), and no...
  17. New Member Introductions
    I just swapped a ka24e from a hardbody, into my 89 240 it's getting fuel just no power to the ignitor . I did everything correct swapped the intake, oil pan , and starter. I've probably read about 100 forums i've tried almost everything, it cranks it just doesn't turn over. I've taken off...
  18. New Member Introductions
    Okay. This is going to a long time in the building since I: a: Don't have any parts b: Don't have a shell or chassis yet c: Don't have the disposable income yet to rectify parts a and b. But here is my plans. Goal/Purpose: Daily driver. Fun in the twisties, minimal occasional drag or...
  19. New Member Introductions
    Hello all, I have been looking into LS swaps for my S13 and since I live in CA, I need to be able to keep all the emissions equipment stock. Does anyone know if the stock headers on an LS1 from an F-Body will clear everything? Thanks in advance for any help or tips.
  20. New Member Introductions
    I recently got back to my work after a long hot day and my battery was dead. I got a friend to come and help jump it, started driving home it was acting as if my rev limit was 2k rpm and I could watch my volts drop as I was driving. It got to the point of being in 5th gear only going 25 mph in...
1-20 of 460 Results
Top