Nissan 240SX Forums banner
1 - 1 of 1 Posts

50 Posts
Discussion Starter · #1 ·
I have some wheels and adapters for sale

17x7.5 +41 WORK Rezax original (3 piece) 4x114.3 Set of 4
one lip is kinda bent, but still holds air fine. I continued to use them on track after it got bent and it doesnt lose any air, so sould be fine for street driving. I originally planned on getting these relipped (bigger outer lip) by kodiak, but i have to sell them now. They sit perfect with the spacers

17x8 +[30something] 5 Zigen typhoons 4x114.3 pair
These rims sit perfect on a car with just a roll and spacers. I had 25 mil spacers on them on the rear and they sit a couple mm overflush. The finish on one of the lips needs to be polished, but other than that, theres no bends or anything wrong with them. I wanted these for a long time and hate to see them go, but ive gotta sell
$275 firm

4x114.3 to 4x114.3 Bolt on wheel spacers
I have a set of 4 (will not part out) with lugnuts and wheel locks. all you need to put these on is open end lugnuts that you can find in the junkyard or if your car came with open end lugnuts, those will work too. The lugnuts and wheel locks provided are a 1.5 thread pitch, which fit the studs on the spacer, but wont fit directly onto your stock wheel studs.
I will only sell these along with the Rezax unless someone buys the wheels first
$200 firm
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.