Nissan 240SX Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
90 S13 with 95ish ka (has been running and driving for 2 years)The drivers fender harness rubbed through so i repaired all the wires and now it won't crank. I have 12.52v at the battery and at the starter.
With 12.52v applied directly to the signal wire of the starter it will click once then the car doesn't have power for 5 or 10 minutes. With signal wire connected normally turn the key all they way and it has the same symptoms 5 to 10 minutes it has power again. Jump pack fully charged has the same effect.
 
1 - 2 of 2 Posts
Top