Nissan 240SX Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
I got one with my car. and i wan to know how to wire it in. i searched the fourms and all i found was how people don't like it.

sorry if this is a repost
 

·
Registered
Joined
·
5,137 Posts
The best thing I can tell you is get on the Apex'i website and download the service manual for it. Which AFC do you have? Also remember, the pin out diagram is showing the back of the harness, as you are looking at it when it's installed in the car (I found this out the hard way, don't ask :p). After you download this, then come back if you have any questions, and we can clarify.
 

·
Registered
Joined
·
5,137 Posts
I don't know if there's really a "how-to." Don't let the manual confuse you. Just find the pin-out for the car/ecu you have, and go from there. If you are not comfortable, take it to any reputable mechanic around you, with the directions, and they should be able to atleast hook it up for you.
 

·
Registered
Joined
·
15 Posts
i got my s14 with the SAFC 2 already installed, i hav it set to the factory settings but the check engine light is on now, how do i tune it because everyhere ive looked just makes me more confused
 

·
Premium Member
Joined
·
47,146 Posts
Check what the light is for before you start changing stuff. And you'll need a Wideband in order to tune it properly.
 

·
Registered
Joined
·
3,015 Posts
Check what the light is for before you start changing stuff. And you'll need a Wideband in order to tune it properly.
Correction, even with a wideband and an act of God there is no way to properly tune such a device of trickery.

yo kid, did you see my thread in the ecu tuning section yet? I figured you would have checked in by now! Youll like what you see.
 
1 - 10 of 10 Posts
Top