Ok well I decided to test the compression on my sr today and the first try I forgot to disconnect the crAnk sensor and now that I'm done and everything it won't start it cranks but won't start what could I have damaged?
Sr20 won't start after compression test!
S13driver4life
1 - 14 of 14 Posts
Joined
·
236 Posts
Ok well I decided to test the compression on my sr today and the first try I forgot to disconnect the crAnk sensor and now that I'm done and everything it won't start it cranks but won't start what could I have damaged?
Joined
·
236 Posts
Anybody? 
Joined
·
2,491 Posts
Joined
·
236 Posts
Ok well I took out fuel pump fuse and then removed all coil packs and spark plugs then tested each cylinder
Joined
·
236 Posts
But I forgot to disconnect the crank sensor when I tried to test first cylindet
Joined
·
236 Posts
Ok well compression was good it did 162 160 160 163 I checked all of my fuses and there good and I have no idea how to check for spark but if it dosnt have spark what should be the problem? Coil packs?
Joined
·
236 Posts
Or ignitor chip? Cuz I herd that checking compression and forgetting to disconnect the crank sensor is bad
Joined
·
236 Posts
Alright I'll do that snd come back and post what happened
Joined
·
236 Posts
Yea I have no spark at all Could this be low battery??
Joined
·
236 Posts
Charger the battery and nothing it has no spark
Joined
·
236 Posts
Ok I have no idea wtf happened but it works now perfectly I didn't move anything or did anything to it but it runs now
1 - 14 of 14 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
