Nissan 240SX Forums banner
621 - 640 of 686 Posts
Asking a lot to go all that way, 2 days on track, and then drive home.

Good choice in not going for it.

Happy running car at home for local events > Breaking down/crashing out here.
 
Discussion starter · #622 ·
yea and my dumbass can't "go easy" at events. once I hit the track all that shit flies out the window.


re set my idle to 800 (was a 900)
timing was spot on. who needs a timing light, not his guy!
gonna play with the wiring a bit now and figure out a temp fix for my crank venting.




All operations have been cancelled for the day

R.I.P. Grandpa
 
Discussion starter · #627 ·
just took the car out for a quick shake down


damn this new turbz has some lungs on it! feels sooo different from the little t25! the clutch kicks are a bit tricky you have to be a bit more aggressive if you are lower in the rpms but if your in boost you have to be very careful, its going to take some getting used to. Also the power band is allot different now it feels like the torque band has really shifted feels like theres allot more torque further up the rpm range. Once in drift its super easy to control unlike the t25 this snail pulls hard right to redline.
 
Discussion starter · #632 ·
found out that I have some shorts. bad shorts from spring when I fucked my harness up.


just yanked out the whole chassis harness, its going to be a longggggggg night...
 
Discussion starter · #634 ·
got delayed by a week because of the storm



got the whole fucking loom right now broken down and spread on out the kitchen floor, what a pita. but I am making headway. going to relocate the relay box under the dash tonight so the only wires going up front will be the lights and I am making them their own harness
 
Discussion starter · #636 ·
it went from disaster to clean


i took some pics will put up later


gonna get an hour or 2 of sleep before i throw it back in, also going to relocate the relay box under the dash. Made a seperate loom for all the front lights
 
Discussion starter · #637 ·
ok I keep forgetting to update with pics so here is a small barage


first off is teh second half of the turbz install

jenky coupling I made

Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image





yea, stripped out oil feed, ic piping trouble, intake trouble, dropping small bolts into the head, stuck closed injectos. lots of fun
 
621 - 640 of 686 Posts